Yeastar PSE - Add a SIP Trunk

Prerequisites

Before beginning the SIP Trunk configuration:

• Create an Extension in Yeastar
• Add your Phone device to the system

Configuration Steps

1. Access Trunk Settings

1. Log in to your Yeastar P Series Software Edition
2. Navigate to: Extensions and Trunk - Trunk - Add
   
   
   

2. Configure Trunk Settings

Basic Settings

• Name: Enter a name to identify the trunk (can be any descriptive name)
• Trunk Status: Enabled
• Select ITSP Template: General or Australia
  
• ITSP: Crazytel (If using ITSP Please also go to SIP Headers and remove Realm as this is currently broken) 

Detailed Configuration

• Trunk Type: Register Trunk
• Hostname/IP: sip.crazytel.net.au (Residential) or sip.biz.crazytel.net.au
• Port: 5060/25160 (UDP or TCP) or 5061 (TLS)
• Domain: sip.crazytel.net.au (Residential) or sip.biz.crazytel.net.au
• Username: Your SIP Trunk ID
• Password: Your SIP Trunk Password
• Authentication Name: Blank
• Enable Outbound Proxy: Disabled
• Outbound Proxy Server: (Only if Outbound Proxy Enabled) brisbane.sip.crazytel.net.au; or sydney.sip.crazytel.net.au; or melbourne.sip.crazytel.net.au; or perth.sip.crazytel.net.au
• Port: 5060/25160 (UDP or TCP) or 5061 (TLS)

DIDs/DDIs

Add

Create Method - Single DID or DID Range
DID/DDI - Your Number in E164 format ie 61412345678
DID/DDI Name - Your DID/DDI Name

3. Save Configuration

• Click Save to apply all settings
  
  

Verification

After configuration:

• You should be able to make outgoing calls
• You should be able to receive incoming calls

Troubleshooting

If you encounter any issues:

• Refer to the Yeastar guides.
• Verify all credentials are entered correctly
• Ensure your network allows VoIP traffic

Note: Keep your Crazytel credentials secure and never share them publicly.